2011 year new gas Conveyor Pizza Oven(WCR-18)

name:gas Conveyor Pizza Oven model:WCR-18 dimensions without packing:1600*750*570mm voltage:220v power(kw):0.06 Transportation and storage In transportation, it should be very careful, prevention from heavy vibration. The equipment in package cannot be put in open-air for long time. It should be put in the good facility of air and non-corrosive air storage. It cannot be put upside-down. If it is necessary to put it in open-air, it should have waterproof facilities Notes and operation environment Electric part installation requirements: (1).The Unit should be placed on stable location. (2).The user should install primary disconnecting device and leakage protection in fired power switch before using.The other object cannot be put around the switch for safe operation. (3). The voltage of power should be the same as nameplate of the equipment. The difference of voltage cannot be beyond +10%. (4).The earthing wire of the equipment (yellow and green wire) leads out with power wire. It should be plugged into the three -pole socket, for which, the reliable earthing wire should be connected. . (5).The equipotential grounded circuit are set in the backside of the unit,the copper wire not less than 2.5mm2 can be used for connection with earthing with earthing which was measured up safety. (6).If the mains cord broken,must be replaced by model “YCW “or “YZW “oil-proof cable which same spec with the broken one and with yellow and green earthing wire. (7).All the electricity connection and installation should be done by qualified electrician. (8) This equipment is not equipped to be used by unwell, unresponsive or mentally disturbed people, including children, unless under the guidance or help of persons who are responsible for their security. Keep an eye on children and keep them away from playing around the equipment.