2011 year new Electric Conveyor Pizza Oven

Pizza Oven Specifications: WDR-12: 1) Dimensions: 1,120 x605 x 490mm 2) Voltage: 220V/380v 3) Power: 8.5kW WDR-18: 1) Dimensions: 1600x 770 x 550mm 2) Voltage: 3N - 380V 3) Power: 14kW WDR-32: 1) Dimensions: 2,200 x 1,100 x 600mm 2) Voltage: 3N - 380V 3) Power: 23kW Transportation 1,During transportation, the machine should be taken care for the strong vibration. The package cannot be put upside sown. It should be put inside the non corrosive gas warehouse. If it is put in the open air, it should be covered with water-proof cloth. Installation: 1,The machine should be put on the flat place. And it should have more than 10cm space with around un-inflammables. In the front, it should have enough working space. 2,You should have fixed power wiring near the working sit and the wires should be equipped with switch break down and electric leaking protection device... It must not have any substance put around the switch. 3,The power supply should be the same as the indication on the nameplate of the machine. The power supply difference should not be over 10% of the rated voltage. 4,The earth wire of the machine (yellow & green one) is together with the power wire. It should be fixed to the qualified earth wire for safety. 5,The wire terminals are in the back of the machine. You should connect with over 2.5mm 2 cross sectional area copper wires. 6,If the power wire is damaged, you should call your supplier or agent to replace it for you. 7,The installation should be done by the qualified electricians. 8,This equipment is not equipped to be used by unwell, unresponsive or mentally disturbed people, including children, unless under the guidance or help of persons who are responsible for their security. Keep an eye on children and keep them away from playing around the equipment. WARNNING: WHEN THE MACHINE IS WORKING, THE TEMPERATURE IS HIGH, NEVER TOUCH IT AND KEEP CHILDREN AWAY FROM THE MACHINE.